Time Machine

To download times from the Time Machine, you must be in the OW Module. To select the OW Module, click Run / OW Module, select an event, and then click Download at the top.

Prepare the Time Machine by pressing the Setup key until the display says [RS232 PORT] and then press ENTER. Press Setup again until the display says [RE-XMIT DATA]. On the HY-TEK computer, click the Start Download button from within the MM Download window to move into the mode where it can receive data. Now press the ENTER key on the Time Machine and the data will be transmitted and received by Hy-Tek. Note: Be sure the [HANDSHAKE-LINE] is off in the Time Machine.

After the download is complete, see the next section on Reading the Downloaded File at the bottom of the Open Water Button Timer Interfaces topic.